[gman]

I cannot seem to find the part for the 2 circles areas in my local Jag garage. The metal bar is now showing as a part and the mounting, we've tried C2Z9569 (from a 3.0) but the markings do not line up with the one's on the car and c2Z21928 (from the 2.2 detail) seems to be only for the right hand drivers side and not for the passenger side as needed. Has anyone ordered these ? Thanks

 

[gman]

If it is the rubbers you are after most exhaust fitting centres will
stock these or something very similar.

Thanks but its the hanger and the mounting that I cannot get right.

 

[gman]

I sent you a pm a couple of weeks ago and you didn't reply.

Ring sturgess ask for Heman. He will sort you out.

I rang alright but I was'nt talking to Heman, I'll call tomorrow. I'll post up once I get this sorted.

 

[gman]

This is a picture of how C2Z9569 lines up on the car.

 

[gman]

This is a picture of how C2Z9569 lines up on the car.

 

[gman]

For anyone interested or looking at this thread, Heman at Sturgess is looking at which hanger can be used with the 2.2. Tried a couple to date but none fit.

 

[gman]

Hi gman, how did you get on with this? I want to fit XFR silencers to my 2.2 so will need the extra hangers.

Haven't made any progress to date. Heman in Sturgess had a look at alot of various hangers but nothing worked. I know that the 2.2 bore is 60mm while the back boxes I have of a 3.0 are 50mm so I wont be able to connect up the system so at this stage, its all visual that I want to complete.

Also looking to get an exhaust tip of a 2.2 if anyone removed there back box for a spires.

 

[gman]

What's the other side like?

Points out towards the wheel. We looked at putting the same hanger as on drivers side on the passenger side but it would point inwards on and wont hang the box. Painful wait as the diffuser is actually on the car and everything else is ready, just need this to get it put together.

There is also the attached bracket needed that does not have a part number

 

[gman]

Quick final update to anyone that may have been following this thread. I FINALLY got the correct parts of Jaguar and it was not easy. The part number needed for the C2Z21929 which were the brackets and mountings for the second exhaust.