Jaguar Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all,
I have inherited a 2011 XF with a blue screen when reversing issue!

I’ve removed the common problem loom (under the rubber sleeve where boot opens) and inspected and it’s all good, in fact I think it might have been replaced not long ago. So I really don’t think it’s that.

It does look as if some other wires nearer the camera have been fiddled With, some are actually uncovered and have some moisture on them which can’t be good.

Does anyone have a wiring diagram for the wires to the camera?
And can anyone confirm this is aftermarket fiddling?
Audio equipment Gadget Adapter Camera accessory Cable
 

·
Super Moderator
Joined
·
20,780 Posts
A broken reversing sensor or sensor loom also causes this issue.

Get a obd reader to scan for the fault.

I had this and we tracked it down to a sensor but it was actually a cable break feeding the sensor behind the bumper.

Fixed it by soldering the cable and heat shrinking it.

Looked like a stone had gone up behind the bumper and impacted the loom.
 

·
Registered
MY 2012 XF S Portfolio Ultimate Black
Joined
·
2,159 Posts

Having said that, the screen goes black when I disconnect the reverse camera. Not blue
 
1 - 3 of 3 Posts
Top