Jaguar Forum banner

41 - 55 of 55 Posts

·
Registered
Joined
·
7,803 Posts
Did you enable Memory Seats?
Another FM told me this.was required in his X250 to make mirror dip work.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #42
No, I didn't change to memory yet.
I found these 2 options with memory.

185804


Should I try the first one?
 

·
Registered
Joined
·
37 Posts
Discussion Starter #43
i got it :)
My Mirrors dip in reverse :geek:
But i dont know exacttly what was the crucial change ;)

now, i have activated:
mirror dip in reverse --> active
Reverse mirror dip --> enabled
memory functionality --> with memory

--> configure new module PAM

then i realized that i have to activate the mirror dip in the clustermenu. Thats why i dont know exactly what change did acitve the dip. I only can say, when you do the same it should work. Perhaps less changes may be sufficient ;)

So the mirror on the passengerside dips down but i cant set the position of the dip.
There is an option "reverse mirror dip strategy" where i could selecet "not supported" and "fixed dip" on both settinngs, the dip is in the same posistion. When i change it while im in reverse --> shift in drive --> mirror goes up --> shift in reverse again --> mirror dips in the starting position and not in the selfdefinitioned position


I also have a great a achievement on the Sim Card.
I got the ICTP to show me the function "mobile Data" and "Wifi Hotspot".
I updated the TCU (telematic system) to the changes.
But the system doesn't react when i plug in SIM card. I think the system should ask the PIN of the SIM Card, but it doesnt.
I inserted a normal nano sim with an nano-to-micro adapter. The nano sim is telephon and data. I think i have read something that the JLR System only accepts data-only-sims. is this correct? Before I buy a data sim just for try, i wanted to ask you :)


by now, i have a problem that my itcp is in english instead of german. I can gange it in the menu and it will stay german for the drive. but when i stop the car, close it, open and start it again, the language is english again :( It is not willing to save the language. Everthing else (volume, tuner,...) is saved.
Do you have an idea what i screwed up?
 

·
Registered
Joined
·
2,140 Posts
The position of the mirror dip on my cars is set with reverse selected, then adjust the position of the mirror with the mirror adjust buttons. The car should remember the setting next time reverse is selected.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #45
The position of the mirror dip on my cars is set with reverse selected, then adjust the position of the mirror with the mirror adjust buttons. The car should remember the setting next time reverse is selected.
i tried this, but the mirror dont remeber the position :(
maybe its an extra change in CCF.

@ Cutlea:
Do you have memory seats?
Do you have edited CCF to get the mirror dip or was is already configured?
 

·
Registered
Joined
·
2,140 Posts
@ Cutlea:
Do you have memory seats?
Do you have edited CCF to get the mirror dip or was is already configured?
Both my cars have memory seats, but don't forget, have systems older than yours. I've not trusted myself with SDD.....yet, so no, I've not ventured to play with CCF editing.
 

·
Registered
🏴󠁧󠁢󠁳󠁣󠁴󠁿X260 R-Sport in Aurora Red
Joined
·
11,260 Posts
new day, new knowledge....
Driver Drowsy:
I had an DTC with IPMA, so i clicked update new module IMPA --> there was the newest firmware already installed, so the updated didnt last 40 min rather only 5 minutes to configurate.
--> Driver Droswsy is now available in the Gaugemenu and stays selecetd :)

Mirror Dip:
I changed all 3 CCF options, but the mirrors wont dip. I also shift in reverse and adjust the mirror, but the mirror wont move while shifting between reverse and drive :(
I don't know what to to do next....

LKA:
LKA s now available in the Gaugemenu and stays selecetd. But the steering movment wont work. When i drive over a line, the LKA symbol in the gauge change from green to red but there is no counter-steer.
So i updated the power steering control module (takes about 5 mins) but there was no improvment.
I don't know what to to do next....
Tommy just a thought have you selected steer assist in the vehicle settings?
185821
 

·
Registered
Joined
·
37 Posts
Discussion Starter #48
Yes of course :)
When I change it to steering vibrate, the steering wheel vibrates when I drive over a line.
But when I select steering assist, there is no reaction while driving over a line.
I have tested both sensitivity modes.
 

·
Registered
🏴󠁧󠁢󠁳󠁣󠁴󠁿X260 R-Sport in Aurora Red
Joined
·
11,260 Posts
any DTCs?
 

·
Registered
Joined
·
37 Posts
Discussion Starter #50
My wife and my son haven been discharged from hospital yesterday. So I have no time for next days to take care my Jag problems.
I will report when I have more time to play again :)

Does anyone know, why my ICTP forgets the language setting? It's a bit annoying when the cluster is in German and the centerdisplay is english...

And do you have a sim card installed at your Jags?
If yes, is it a data only card or a normal sim card for phone&data?
 

·
Registered
🏴󠁧󠁢󠁳󠁣󠁴󠁿X260 R-Sport in Aurora Red
Joined
·
11,260 Posts
My wife and my son haven been discharged from hospital yesterday. So I have no time for next days to take care my Jag problems.
I will report when I have more time to play again :)

Does anyone know, why my ICTP forgets the language setting? It's a bit annoying when the cluster is in German and the centerdisplay is english...

And do you have a sim card installed at your Jags?
If yes, is it a data only card or a normal sim card for phone&data?
Glad to hear mother and baby are doing well :)
can‘t think why ICTP is changing language, I guess it‘s only done this since you’ve changed the ccf?
I don’t have ICTP only ICT so I has a built in sim for remote starting/location
I‘ve a slot in the boot that takes a sim but this is only to create a hotspot.
 

·
Registered
Joined
·
7,420 Posts
Enjoy your time with your wife and new son Tom, hope all remains well with them.
 
  • Like
Reactions: Gav

·
Registered
Joined
·
7,803 Posts
Glad they’re getting out and hope they are well.

Like Gav I have a built in SIM for Jaguar Remote and a SIM card holder in the boot for In-car WiFi.

I’m on ICT as well. With a broken SatNav SD card.
 

·
Registered
🏴󠁧󠁢󠁳󠁣󠁴󠁿X260 R-Sport in Aurora Red
Joined
·
11,260 Posts
Yes of course :)
When I change it to steering vibrate, the steering wheel vibrates when I drive over a line.
But when I select steering assist, there is no reaction while driving over a line.
I have tested both sensitivity modes.
Just thinking about this, do you get one or two green lines either side of the car graphic (to Indicate the car has identified a line?)
also if drive deliberately over a line without signalling you might just get a red warning.
To test mine I make sure the line is green on the driver side then I slowly steer towards the line and only when you’re quite close to it does the correct you.
just a thought....
 

·
Registered
Joined
·
37 Posts
Discussion Starter #55
Yes, i get the green lines.
When I drive over a line, the symbol changes to a red one (car crosses the lines).
There the Lanedepature warning still works (steering vibrates) the line recognition should be fine. But the steering motor won't do anything :)
By now, I don't have much time to spent playing in the car. There I have some other open things to check, I will start again soon.
 
41 - 55 of 55 Posts
Top