[Gav]

Have you tried the calibration procedure? You might have several faults, and one of them being a faulty brake switch, so you might need to push quite a bit harder than normal on the brake pedal. Also it should auto disengage when d is selected and you lightly press the accelerator pedal.

 

[Gav]

What happens if you try to drive?

 

[Gav]

With the water spillage, have you "goosed" the EPB Module, which sits off side behind the rear seats?

I was thinking this too, given it can't be reset and it should auto release when in d and trying to drive too.

 

[Gav]

You can release the EPB manually. Can't recall if it's the same routine as they parking pawl on different hidden place. Someone on here will know.

Sent from my SM-G935F using Tapatalk

Haven't heard you can EPB manually as its on Bowden cables.

 

[Gav]

Hi all
Car starting lovely but EPB still locked on Does anyone know if I was to get hold of another EPB module would this have to be programmed for my car or can I just swap it over.

Can't think that's been asked before mate, but if I had to take an educated guess I'd say it doesn't need programmed as it probably won't be part of the can bus.